CONTROL PANEL / VVVF
Sensitive stop and start in frequency controlled
systems.
Options of parameters for elevator in frequency
controlled systems.
Energy Save in frequency controlled systems.
Initiation of elevator motor up 5-32 KW in frequency
controlled systems.
Compatible with and without encoder in frequency
controlled systems.
User -friendly menu and keypad in frequency
controlled systems.
Viewing the cruising graph in frequency controlled
systems.
Rescuing opportunity without rescuer card in
frequency controlled systems.
CONTROL PANEL / TOW SPEED
- Ochen Controller can control electric or hydraulic lift up to 16 stops. Different systems of calls can be selected: collective-selective, simple or APB. Shaft information system can be selected by parameters. Also many additional functions are available like, park drive, re-leveling, locking, error history etc. all programming is made with special programing service tool.
- Supply voltage 12 VAC and 24 VAC Battery for emergency light Up to 16 (30 with extension ) call buttons with call confirmation Up to 21 inputs for signals from the system.
- Outputs from 16 built relays for system, position and direction output.
- Output 24V DC for buttons. LED diode show presence of voltage 24V DC. Inputs 48 V DC or 60V DC not stabilized. Common terminal (ground) is the same as for 24V DC!
- Terminals for thermistor in the main motor. LED diode lit when thermistor is connected and temperature is normal.
- Terminals for emergency light and battery 12V DC.
- LED diode lit when voltage for charging battery is normal.